Analog Internal Micrometer Supplier in Dubai, UAE.
- ABOUT PRODUCT
Analog Internal Micrometer
The Microtest analog internal micrometer measures bore diameters with three measuring spindles that are adjusted together and guide the probes into position. A direct read-out display is designed to cut down reading errors, and repeatability is operator-independent at ±1–2 µm up to Ø400 mm. For anyone comparing an analog internal micrometer supplier in Dubai, UAE, the range here covers nine sizes, from 30–40 mm up to 900–1150 mm. Depending on size, one instrument can stand in for several conventional ones, so fewer setting rings need to be stored and calibrated.
Internal-Micrometer Analog
30-40mm
Internal-Micrometer Analog
40-60mm
Internal-Micrometer Analog
60-90mm
Internal-Micrometer Analog
90-140mm
Internal-Micrometer Analog
140-240mm
Internal-Micrometer Analog
240-400mm
Internal-Micrometer Analog
400-650mm
Internal-Micrometer Analog
650-900mm
Internal-Micrometer Analog
900-1150mm
- Why Choose Us
Why Choose Analog Internal Micrometers?
Repeatable Readings
Operator-independent repeatability of ±1–2 µm up to Ø400 mm.
Wide Size Coverage
Nine ranges cover bores from 30 to 1150 mm.
Direct Scale Reading
Parallax-free scale gives direct readings down to 1 µm.
Deep Bore Reach
Extensions reach into deep bores, up to 10 m.
- APPLICATIONS
Where Analog Internal Micrometers Are Used
- Machine & Tool Manufacturing
- Pumps & Compressors
- Gear Manufacturing
- Oil & Gas
- Power Plants
- Mining
- Aviation & Aerospace
- Heavy Engineering
- Quality Control & Inspection
- Automotive Manufacturing
CONTACT NOW
+971 56 744 6445
contact@egmicrotest.com
Frequently Asked Questions
It is a precision measuring instrument for the internal diameter of holes, bores and cylindrical components. The Microtest version uses three measuring spindles and a direct read-out display, so the bore size is read straight from the scale.
Nine ranges are available, from 30–40 mm up to 900–1150 mm: 30–40, 40–60, 60–90, 90–140, 140–240, 240–400, 400–650, 650–900 and 900–1150 mm.
Yes. Extensions can be combined to reach 10 metres or more, which allows measurement deep inside long bores.
They are used wherever bore diameters have to be checked against a tolerance, such as machined components, housings and cylinders, in both production and inspection work.
Measure or check the nominal diameter of the bore, then pick the range that contains it. A 52 mm bore, for example, falls within the 40–60 mm instrument. For deep bores, add the extensions needed to reach the required depth.
Microtest is based in the Sharjah Free Zone and takes enquiries from Dubai customers through its website. The analog range covers bore sizes from 30 mm to 1150 mm.